View IC-SG85BLCCSG1C_4951789.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

iC-SG85 BLCC SG1C
Infrared LED
y inar im prel
Rev A1, Page 1/4 APPLICATIONS o Illumination for high resolution optical encoder o Modulated light barriers
FEATURES o o o o o Emission peak at 850 nm matched to silicon sensors Optimized irradiance pattern High temperature range -40 to 125 C High optical output power Fast switching speed
PACKAGES
SG1C
PACKAGES (top view) PIN CONFIGURATION SG1C PIN FUNCTIONS No. Name Function 1C 2A Cathode (-) Anode (+)
ABSOLUTE MAXIMUM RATINGS
Beyond these values damage may occur (Ta = 25C, unless otherwise noted) Item No. Symbol Parameter Forward current (DC) Surge forward current Reverse voltage Power dissipation temperature dependence see fig. 1 tp 10 s, 5 % duty cycle Conditions Min. Max. 100 1500 5 150 mA mA V mW Unit
G001 IF G002 IFSM G003 VR G004 P
All voltages are referenced to ground unless otherwise stated. All currents flowing into the device pins are positive; all currents flowing out of the device pins are negative.
iC-SG85 BLCC SG1C
Infrared LED
y inar im prel
Rev A1, Page 2/4
THERMAL DATA
Item No. T01 T02 T03 Symbol Ta Ts Tpk Parameter Operating Ambient Temperature Range Storage Temperature Range Soldering Temperature tpk < 5 s, manual soldering; Not suitable for reflow or vapor phase soldering. 300 -40 125 Conditions Min. -40 -40 Typ. Max. 125 125 260 C C C Unit
T04 T05
Rthja Tj
Thermal resistance junction to ambient Junction Temperature
K/W C
Figure 1: Maximum power dissipation with respect to temperature
ELECTRICAL CHARACTERISTICS
Tamb = 25C, unless otherwise noted Item No. 001 002 003 004 005 006 008 Symbol Parameter Conditions Min. VF VR e TK( e ) p tr, tf Forward voltage Reverse voltage Radiant power IF = 20 mA IR = 5 A IF = 20 mA 5 2.7 -0.6 840 850 30 12 860 Typ. 1.4 Max. 1.8 V V mW %/K nm nm ns Unit
Electrical and Optical Characteristics
Temperature coefficient of radiant IF = 20 mA, Tamb = 25C...125C power Peak wavelength Spectral half width Switching time IF = 20 mA IF = 10 mA IF = 100 mA, RL = 50
Remarks: Measured optical characteristcs may depend on conditions and equipment and thus differ in its given typical values.
iC-SG85 BLCC SG1C
Infrared LED
y inar im prel
Rev A1, Page 3/4
PACKAGE DIMENSIONS
Figure 2: Package view
iC-Haus expressly reserves the right to change its products and/or specifications. An Infoletter gives details as to any amendments and additions made to the relevant current specifications on our internet website www.ichaus.de/infoletter; this letter is generated automatically and shall be sent to registered users by email. Copying - even as an excerpt - is only permitted with iC-Haus approval in writing and precise reference to source. iC-Haus does not warrant the accuracy, completeness or timeliness of the specification on this site and does not assume liability for any errors or omissions in the materials. The data specified is intended solely for the purpose of product description. No representations or warranties, either express or implied, of merchantability, fitness for a particular purpose or of any other nature are made hereunder with respect to information/specification or the products to which information refers and no guarantee with respect to compliance to the intended use is given. In particular, this also applies to the stated possible applications or areas of applications of the product. iC-Haus conveys no patent, copyright, mask work right or other trade mark right to this product. iC-Haus assumes no liability for any patent and/or other trade mark rights of a third party resulting from processing or handling of the product and/or any other use of the product. As a general rule our developments, IPs, principle circuitry and range of Integrated Circuits are suitable and specifically designed for appropriate use in technical applications, such as in devices, systems and any kind of technical equipment, in so far as they do not infringe existing patent rights. In principle the range of use is limitless in a technical sense and refers to the products listed in the inventory of goods compiled for the 2008 and following export trade statistics issued annually by the Bureau of Statistics in Wiesbaden, for example, or to any product in the product catalogue published for the 2007 and following exhibitions in Hanover (Hannover-Messe). We understand suitable application of our published designs to be state-of-the-art technology which can no longer be classed as inventive under the stipulations of patent law. Our explicit application notes are to be treated only as mere examples of the many possible and extremely advantageous uses our products can be put to.
iC-SG85 BLCC SG1C
Infrared LED
y inar im prel
Rev A1, Page 4/4
ORDERING INFORMATION
Type iC-SG85
Package SG1C
Order Designation iC-SG85 BLCC SG1C
For technical support, information about prices and terms of delivery please contact: iC-Haus GmbH Am Kuemmerling 18 D-55294 Bodenheim GERMANY Tel.: +49 (61 35) 92 92-0 Fax: +49 (61 35) 92 92-192 Web: http://www.ichaus.com E-Mail: sales@ichaus.com
Appointed local distributors: http://www.ichaus.com/sales_partners

▲Up To Search▲

Price & Availability of IC-SG85BLCCSG1C

	To Download IC-SG85BLCCSG1C Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .